Pall Information

           
OEM CROSS REFERENCE  
   
Pall   HC8310FKZ39H   FMC   F8310-39K1B
    HC8310FKP39H       F8310-39K3B
    HC8310FKN39H       F8310-39K6B
    HC8310FKS39H       F8310-39K12B
    HC8310FKT39H       F8310-39K25B
 
 
ELEMENT RATING    
   
     
Pall Micron FMC Average Filter, Ratio
KZ 1 K1 Bx200 @ 1 Micron
KP 3 K3 Bx200 @ 3 Micron
KN 6 K6 Bx200 @ 6 Micron
KS 12 K12 Bx200 @ 12 Micron
KT 25 K25 Bx200 @ 25 Micron
Test Containment   AC Fine Test Dust ACFTD
Test Oil   MIL H-5606
Terminal Pressure   60 PSID (4.14 bar)
     
     
Element Collapse Press   ANSI B93.25/ISO 2941   100 PSID ( 6.9 bar ) Minimum
Dirt Holding Capacity   ANSI B93.31/ISO 4572   Varies with media, liquid, flow & differential pressure
Flow Fatigue Resistance   ANSI B93.24/ISO 3724   Element media supported up & down stream
Fluid Compatibility   ANSI B93.23/ISO 2943   Compatible with Petroleum Oils 250 F (121 C)
        Water based fluids, Water Glycol 200 F ( 93 C)
        Phosphate Esters require Viton A "O" Rings
Element Integrity   ANSI B93.22   8 IN. Min. Water column Bubble Point (20.3 cm)
Operating Temperature       -20 + 250 F (-29 + 121 C)
 
ELEMENT DATA    
   
Filtration Area   8300 SQ.IN. (5.35 M2)
Element Type   Disposable
Direction of Flow   Out/In
Element Media   Microglass
Bond Material   Epoxy
Hardware   Plated Steel
     
Element QTY/CTN   1 One
Element WT /CTN   18 LBS (8.2 kg)
Element VOL/CTN   1830 CU.IN. (0.030 m3)
 

 
** Element may vary from picture.

[ Page Back]