Filtermart™ Coalescer Filters : Air

Browse our selection of paper particulate filter elements to find a replacement that matches your required micron rating, flow rate, dimensions, end-cap configuration, and housing. OEM cross-references can also help simplify replacement selection for existing compressed air filtration systems.

Paper Particulate Filter Elements

As compressed air moves through the filter housing, solid contaminants are captured within the pleated paper media. The increased surface area helps the element accommodate a substantial dirt load while providing an appropriate flow path for the application.

Depending on the specific element design, the media may also help capture larger liquid droplets. Paper particulate elements, however, should not be treated as a direct substitute for high-efficiency fine coalescing filters when removal of very small oil or water aerosols is required.

Key Benefits of Filtermart Paper Particulate Filter

• Pleated paper media provides increased filtration surface area for effective particulate loading.
• Resin-treated media helps maintain element strength and dimensional stability during operation.
• Reinforced end-cap construction supports reliable installation in compatible filter housings.
• Particulate pre-filtration helps remove bulk solid contamination before it reaches finer filtration stages.
• Cost-effective filtration makes paper particulate elements practical for high-contamination applications.
• Downstream protection can help extend the service life of finer filters, dryers, valves, regulators, and pneumatic equipment.
• OEM cross-referencing can simplify replacement selection for existing systems.

Paper Particulate Filters for Compressed Air Systems

Industrial compressed air systems often use multiple filtration stages, with each filter performing a specific role. A paper particulate filter can serve as an initial pre-filter where substantial solid contamination is present.

By removing larger particulate matter before air reaches finer coalescing, adsorption, or other specialized filtration stages, the pre-filter can reduce contaminant loading on downstream elements and help maintain overall system performance.

Why Buy Paper Particulate Coalescer Filters from Filtermart?

We offer replacement paper particulate filter elements covering a broad range of part numbers and cross-references, making it easier to identify a compatible replacement for your existing compressed air filter housing.

When selecting an element, verify important specifications such as micron rating, flow rate, dimensions, end-cap configuration, and housing compatibility. For bulk or recurring requirements, contact our team to discuss available quantities, pricing, and replacement options.

Choose the Right Paper Particulate Filter from Us

1. Micron rating: Choose a filtration rating appropriate for the particle size and level of particulate removal required by your application.

2. Flow rate (CFM): Make sure the filter element can accommodate the compressed air flow required by your system.

3. Housing compatibility: Verify the element diameter, length, connection, end-cap style, and other dimensions against your existing housing.

4. OEM cross-reference: Use the original manufacturer part number when available to identify a compatible replacement.

5. Operating conditions: Consider pressure, temperature, humidity, contaminant load, and the overall filtration configuration.

If you are unsure which element is appropriate, browse our industrial filters category or contact our team with your existing part number and application details.

Frequently Asked Questions

What is a paper particulate coalescer filter used for?

Paper particulate filter elements are primarily used in compressed air systems to remove bulk solid contaminants such as dust, wood particles, scale, and other debris. They are commonly installed as a pre-filtration stage to protect downstream filtration and pneumatic equipment.

How often should paper particulate filters be replaced?

Replacement intervals depend on contaminant load, operating hours, airflow, and filter design. A noticeable increase in differential pressure across the element can indicate that replacement may be required. Follow the filter manufacturer's maintenance guidance for your application.

Can paper particulate filters be used in high-humidity environments?

Resin-treated paper media is designed to provide improved structural stability compared with untreated paper media. Suitability still depends on the specific element construction and operating conditions, so always confirm the manufacturer's pressure, temperature, humidity, and compatibility specifications.

What is the difference between paper particulate and borosilicate coalescer filters?

Paper particulate elements are primarily intended for bulk particulate and solid-contaminant removal, while borosilicate glass coalescing elements are commonly used for high-efficiency removal of fine liquid aerosols. In multi-stage systems, a paper particulate element may be used as a pre-filter ahead of a finer coalescing stage.

Do you offer OEM cross-references for paper particulate filters?

Yes. OEM cross-referencing can help identify a compatible replacement based on the part number of your existing filter element. Verify the part number together with dimensions, micron rating, flow requirements, and housing compatibility.

Can I buy paper particulate coalescer filters in bulk?

Yes. Paper particulate filter elements can be purchased for individual replacement needs as well as larger industrial requirements, depending on product availability. Contact our team to discuss bulk quantities and pricing.

Will a paper particulate filter fit my existing compressed air housing?

Compatibility depends on the specific filter housing and element design. Before ordering, verify the element diameter, length, end-cap configuration, connection style, and part number against your existing filter.